Simple supercapacitor charging scheme of an electric vehicle on small-scale hardware simulator: a prototype development for education purpose

Adnan Rafi Al Tahtawi; Arief Syaichu Rohman; Adnan Rafi Al Tahtawi; Arief Syaichu Rohman

doi:10.14203/j.mev.2016.v7.77-86

Simple supercapacitor charging scheme of an electric vehicle on small-scale hardware simulator: a prototype development for education purpose

Adnan Rafi Al Tahtawi, Arief Syaichu Rohman

Abstract

Supercapacitor is one of electrical energy sources that have faster charging-discharging times when compared to other power sources, such as battery and fuel cell. Therefore, it is often used as an additional power source in an electric vehicle. In this paper, a prototype of small-scale electric vehicle simulator (EVS) is built and a simple charging scheme of supercapacitor is used for education purpose. EVS is an electric vehicle prototype which can show the vehicle’s powertrain on small-scale configuration. Main components of this device are two direct current motors (DCMs) with a linked axis of rotation. Therefore one of them will be able to act as a generator. The supercapacitor charging scheme is employed by controlling the relays. The hardware experimental result shows that the averages of charging current are proportional to the maximum slope angle of the road profiles. This scheme is simple due to the EVS utility and it is useful for education purpose.

10.14203/j.mev.2016.v7.77-86

Keywords

supercapacitor; charging; electric vehicle simulator (EVS); direct current motor (DCM)

Full Text:

PDF

References

A. Khaligh and Z. Li, “Battery, ultracapacitor, fuel cell, and hybrid energy storage systems for electric, hybrid electric, fuel cell, and plugin hybrid electric vehicles: State of the art,” IEEE Trans. Veh. Technol., vol. 59, no. 6, pp. 2806–2814, July 2010. crossref

M. Choi et al., “Energy management optimization in a battery/supercapacitor hybrid energy storage system,” IEEE Transactions on Smart Grid, Vol. 3, No. 1, pp. 463-472, March 2012. crossref

S. Pay and Y. Baghzouz., “Effectiveness of battery-super capacitor combination in electric vehicles,” IEEE Bologna PowerTech Conference, pp. 728-733, June 2003.

Y. C. Zhang et al., “Study of Supercapacitor in the Application of Power Electronics,” WSEAS Transaction on Circuits and Systems, vol. 8, Issue 6, pp. 508-517, ISSN: 1109-2734, June 2009.

A. B. Cultura, Z. M. Salameh, “Modeling, evaluation and simulation of a supercapacitor module for energy storage application,” International Conference on Computer Information Systems and Industrial Applications (CISIA), pp. 876-882, 2015. crossref

M. S. W. Chan et al., “Effective charging method for ultracapacitors,” Journal of Asian Electric Vehicles, Vol. 3 No. 2, pp. 771-776, December 2005. 10.4130/jaev.3.771

S. Ban et al., “Charging and discharging electrochemical supercapacitors in the presence of both parallel leakage process and electrochemical decomposition of solvent,” Electrochimica Acta, vol. 90, pp. 542-549, 2013. crossref

Y. Diab et al., “Comparison of the different circuits used for balancing the voltage of supercapacitors: studying performance and lifetime of supercapacitors,” ESSCAP, Nov, Lausanne, Switzerland, 2006.

Y. Qu et al., “Overview of supercapacitor cell voltage balancing methods for an electric vehicle,” ECCE Asia Downunder (ECCE Asia) IEEE, 2013. crossref

A. Botelho and W. Price, “Protodrive: Rapid prototyping and simulation for EV powertrains,” ESE 350: Embedded Systems/Microcontroller Laboratory, University of Pennsylvania, 2012.

S. Diaz et al., “Protodrive: An experimental platform for electric vehicle energy scheduling and control,” Dept. Electrical and System Engineering, University of Pennsylvania, 2012.

S. Diaz, “Protodrive: Simulation of electric vehicle powertrains,” NSF Summer Undergraduate Fellowship in Sensor Technologies, Binghamton University, 2012.

W. Price, “Protodrive,” Project Technical Note, 2012.

A. Mulay et al., “Protodrive: Rapid prototyping platform for electric vehicle powertrain,” Project Technical Note, 2013.

A. R. Al Tahtawi, A. S. Rohman, “Simple supercapacitor charging scheme in electrical car simulator using direct current machines,” Proceeding of The 5th IEEE International Conference on Electrical Engineering and Informatics (ICEEI) Bali, pp. 562-567, 2015. crossref

M. Ehsani et al., “Modern electric, hybrid electric, and fuel cell vehicles - Fundamentals, theory, and design,” first edn, CRC Press LLC, 2005.

Nesscap 100F/2.7F Ultracapacitor Datasheet, Nesscap Co., Ltd. 2003.

E. Schaltz, “Electric vehicle design and modeling,” Aalborg University, Denmark, INTECH Open Acces Publisher, 2011.

Article Metrics

Metrics Loading ...

_{Metrics powered by PLOS ALM}

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Cited-By

1. Control of Manganese Oxide Hybrid Structure through Electrodeposition and SILAR Techniques for Supercapacitor Electrode Applications
Kanisorn Klangvijit, Winadda Wongwiriyapan, Teerayut Uwanno, Michiko Obata, Masatsugu Fujishige, Kenji Takeuchi, Mayuree P. Reilly
Coatings vol: 13 issue: 8 first page: 1403 year: 2023
doi: 10.3390/coatings13081403