An alternative design and implementation of a solid state on-load tap changer

Benjamin Kommey; Elvis Tamakloe; Gideon Adom-Bamfi; Daniel Opoku; Benjamin Kommey; Elvis Tamakloe; Gideon Adom-Bamfi; Daniel Opoku

doi:10.14203/j.mev.2021.v12.104-109

An alternative design and implementation of a solid state on-load tap changer

Benjamin Kommey, Elvis Tamakloe, Gideon Adom-Bamfi, Daniel Opoku

Abstract

Power quality and reliability are of great importance in the modern world, whether it be the power generated by the power utilities or the power consumed by the customer respectively. They need these supplies to be at its optimum value so that the cost is effective, and the safety of devices assured otherwise problems such as overvoltage, under-voltage, and voltage sags caused by disturbances in the power supply could be disastrous. On-load tap changers (OLTC) have therefore been used since the inception of electrical engineering. The main function of the OLTC is to change the turns of the transformer winding so that the voltage variations are limited without interrupting the secondary current.The major idea is that the electronic switches and other smart systems provide more controllability during the tap changing process, unlike mechanical switches.This paper presents an alternative design and implementation of a low-cost solid-state OLTC and employs a control strategy that is microcontroller-based, ensuring the desired flexibility and controllability required in programming the control algorithms.It eliminates the limitations of both mechanical and hybrid OLTCs (arcing, slow response time, losses) and is user-friendly (provides an effective communication medium). Voltage regulation is achieved by varying the turns of the transformer winding whiles it is energized, supplying load current and with the tap selection carried out on the primary side. Therefore, this approach provides a less expensive system but ensures the efficiency and reliability of voltage regulation.

10.14203/j.mev.2021.v12.104-109

Keywords

on-load tap changer; solid-state switch; potential transformer winding; voltage regulation.

Full Text:

PDF

References

S. M. Bashi, “Microcontroller-based fast on-load semiconductor tap changer for small power transformer,” Journal of Applied Sciences. 5(6): pp. 999-1003, 2005.

P. Okanik, B. Kurth and J. H. Harlow, "An update on the paralleling of OLTC power transformers," IEEE Transmission and Distribution Conference, vol. 2, pp. 871-875. 1999.

C.R. Bayliss, Transmission and Distribution: Electrical Engineering, 2nd ed. Newnes, 1999.

R. Shuttleworth, A. J. Power, X. Tian, H. Jiang and B. A. T. Al Zahaei, "A novel thyristor-assisted tap changer scheme," 14th International Conference and Exhibition on Electricity Distribution. Part 1. Contributions (IEE Conf. Publ. No. 438), pp. 28/1-28/5 vol.1, 1997.

Hao Jiang, R. Shuttleworth, B. A. T. Al Zahawi, X. Tian and A. Power," Fast response GTO assisted novel tap changer," IEEE Transactions on Power Delivery, vol. 16, no. 1, pp. 111-115, Jan. 2001.

G. H. Cooke and K. T. Williams, “New thyristor assisted diverter switch for on-load transformer tap changers.” IEE Proceedings-B, 139: 507-511, 1992.

R. Fourie and H. du T. Mouton, “Development of a MV IGBT based solid-state tap changer.” IEEE, AFRICON, 2009.

R. Sangeerthana and S. Priyadharsini, “Controlling of power transformer tap positions using facts devices.” Perspective in Communication,” Embedded-Systems and Signal Processing International Journal, Vol. 4, Issue 7, 2020.

D. Nadeem, Haroon-ur-Rashid and M. Saeed, "Fully electronic tap changer control," 2013 IEEE Conference on Clean Energy and Technology (CEAT), 2013, pp. 114-117.

T. Yuvaraja and S. Vigneshwaran, “Voltage regulation by solid state tap change mechanism for Distributing Transformer,” International Journal of Engineering Research and Technology, Vol.4, Issue 02, 2015.

V. S. Kale, H. K. Chaure, and P. J. Pawar, “On Load Tap Changer of Transformer using Microcontroller.” International Journal for Scientific Research and Development, Vol.6, Issue 01, 2018.

H. R. Sawake, B. V. Sande, V. A. Ekkaldevi, S. R. Argade, and N. P. Zinjad, “Power electronic based on-load tap changer,” International Journal of Research in Engineering, Science and Management, Vol.1. Issue 12, 2018.

A. Ahmed, N. Ullah, and M. Idrees, “Design and simulation of imporved on load tap changer to mitigate voltage sag/swell,” International Journal of Power Systems, Vol. 5, 2020.

P. P. Adasur and D. G. Chougule, “A review of power transformer tap switching using semiconductor devices,” International Journal of Research Publications in Engineering and Technology, Vol. 2, Issue7, 2016.

A. K. Gamit. “Design of solid-state on-load tap changer for transformer using microcontroller,” International Journal of Science and Research, Vol.7, Issue 11, 2018.

Rao, S. V. M. Bhuvanaika, B. Subramanyeswar, "Fine voltage control using oltc by static tap change mechanism," International Journal of Advanced Computer Research; Bhopal Vol. 2, Iss. 4, (Dec 2012): 328-333.

P. B. Thakare, and M. A. Mechkul, “Electronics solid state voltage regulating relay for on load tap changer distribution transformer for automatic voltage regulation,” International Journal of Modern Trends in Engineering and Research, Vol.4, Issue 06, 2017.

M. H. Taha, “On load single-phase solid-state tap changer,” International Journal of Engineering Technologies, Vol.2, No.2, 2016.

A. B. Kavad, S. N. Khandhar, B. A. Sodha, and Y.D. Tita, “Solid state tap changer for utility transformer,” International Journal for Scientific Research and Development, Vol.5, Issue 02, 2017.

I. K. Pota, S. Bhatti, I. Rathod, P. Sudiya, and S. Rohit, “Microcontroller based tap changer for power transformer,” Journal of Emerging Technologies and Innovative Research, Vol.5, Issue 04, 2018.

M. A. Sanjay, T. S. Raosaheb, N. S. Ravindra, V. R. Kirandas, “Solid state on load tap changer for transformer,” Resincap Journal of Science and Engineering, Vol.5, Issue 04, 2021.

N. Nagalakshmi and T. Thivagar, “Automatic tap-changer with triac switch for constant voltage and current measurements,” International Journal of Recent Technology and Engineering, Vol. 9, Issue 2, 2020.

“Triac couplers - basic properties and application design,” TOSHIBA electronic devices and storage corporation, Rev.1.0 , 2018.

V. T. Chacko, M. P. Noufal, N. P. Mohan, S. B. Vinod and K. A. Eldhose, "Solid state on load tap changer for transformer using arduino," International Research Journal of Engineering and Technology, vol. 4, no. 4, p. 4, 2017.

V. S. Bugade, E. Mishra, M. H. Jayebhaye, H. Joshi, A. Patil, and B. Kale, “Automatic voltage control of load using on load tap changer,” International Journal for Research in Applied Science and Engineering Technology, Vol. 6, Issue 03, 2018.